Moulding a Future in Quality

 


 

info@gentechpu.com

ISO 9001:2008

 


 

barry@gentechpu.com

 

 

 

 

 

 

 

 

Company ProfileHomeFindLogin  
 Product Catalogue
Abrasion/Wear resist - Abrasion/Wear resist
Most abrasion resistant materials are composed of SBR, natural rubber or a combination of each. These special service materials are compounded specifically to provide greater wear and tear resistance.
Cork/Neocork - Cork/Neocork   View Specifications
The durability and versatility of cork has made it one of the most popular materials for sealing applications. Being a natural product, it possesses many advantages. It can be compounded with a variety of raw materials to provide a comprehensive range of sealing products.  High tensile strength, resistance to many fluids, ability to withstand extremes of temperature - with the natural properties of cork - high compression, good recovery and low load sealing.
EPDM - EPDM   View Specifications
EPDM stands for Ethylene Propylene Diene Monomer. Engineering specifications describe EPDM as "Ideal for outdoor applications because of its excellent resistance to ultra-violet light, ozone, oxidants, and severe weather conditions."
Stays flexible in temperatures from -40 Fahrenheit to 175 Fahrenheit making it easy to install all year round. Unlike other liner materials, it does not contain plasticizers that could make it become brittle with age and cause cracks or splits in the material; threatening aquatic life.
EPDM's flexibility provides more versatility in numerous designs. Unlike preformed liners, it can be easily shaped to fit the unique contours of... more»
Food Grade - Food Grade   View Specifications
A superior long life sheet for general gasketing in all phases of food processing and in the manufacturing of pharmaceuticals and cosmetics products. Has good abrasive qualities and resistance to oily and greasy food products. Excellent oil, heat and ozone resistance.
Gum Stock - Gum Stock   View Specifications
Water, air and average concentration bases, alcohols and salts. Adhesion to metals is excellent and ketones are abrasion resistant.
Hygrade LS - Klinger Hygrade LS   View Specifications
Hygrade LS sheet gasketing is made of 100% expanded PTFE using a special process that produces a uniform and highly fibrillated multidirectional microstructure.  This creates a soft and pliable, yet very tough gasket that has excellent resistance to compression, creep relaxation and cold flow.  Suitable for un-even and damaged flanges.
Insertion Rubber - Insertion Rubber   View Specifications
This rubber product is made of natural rubber with a cloth inner liner, giving the product higher tear strength than ordinary rubber sheeting. Insertion Rubber is used for a variety of applications including matting, packing, gaskets dust curtains and mud flaps.
Nitrile Insertion rubber is used for some gasket and diaphragm applications.
Neoprene/Nitrile - Neoprene   View Specifications
One of the earliest of the synthetic materials to be developed as an oil resistant substitute for Natural Rubber, Neoprene is a homopolymer of chloroprene (chlorobutadiene).
Temperature Range: Standard Compound: 45 F to +250 F. (Dry Heat Only)
Hardness (Shore A): 40 to 90.
Features: Neoprene can be used in innumerable sealing applications, due to its broad base of such desirable working properties as: moderate resistance to petroleum oils; good resistance to ozone, sunlight and oxygen aging; relatively low compression set; good resilience; and reasonable production cost.
Due to its excellent resistance to  Ammonia, Neoprene is also widely accepted as... more»
Neoprene/Nitrile - Nitrile   View Specifications
Nitrile rubber, or Buna-N,is a synthetic rubber copolymer of acrylonitrile (CAN) and butadiene.  This copolymer of butadiene and acrylonitrile is recommended when excellent resistance to petroleum oils and gasoline is required.  Solvent resistance increases and low temperature flexibility decreases in basic polymers with higher acrylonitrile content. Low temperature resistance is inferior to natural rubber, but NBR can be compounded to give adequate performance in this area.
Non-Asbestos - Klinger C4324 - Graphite
 
Non-Asbestos - Klinger C4324 - Plain
 
Non-Asbestos - Klinger C4400   View Specifications
High quality non-asbestos material composed of fibres with highest chemical stability and heat resistance. Outstanding creep resistance at high temperatures and high loads provides maximum safety, high torque retention and excellent sealing characteristics.
Non-Asbestos - Klinger C4408   View Specifications
Wire reinforced version of our style C-4400.
Formulated for pulsating pressure applications.
3XA Anti-stick coating on both sides to ease flange separation.
Max. Temperature: 400 deg C
Max. Pressure: 100 bar
Non-Asbestos - Klinger C4430   View Specifications
Represents a new standard in compressed synthetic fibre gasket materials. First non-asbestos grade to have similar properties to premium grade C.A.F. jointing.
High quality premium grade with excellent chemical resistance. Suitable for use with air, water, saturated steam* (250 deg C), oils, fuels and gases.
3XA Anti-stick finish on both sides to ease flange separation.
Max. Liquid Temperature: 430 deg C
Max. Pressure: 100 bar
Non-Asbestos - Klinger C4500   View Specifications
A sheet with excellent chemical stability e.g. concentrated alkalis. It is also an excellent steam gasket. To 300 deg C saturated temperature*. Can be also used on various oils. Its primary application is in the strong alkalis range.
3XA Anti-stick coating on both sides.
Max. Temperature: 450 deg C
Max. Pressure: 130 bar
Non-Asbestos - Klinger C4509   View Specifications
 
Non-Asbestos - Klinger C8200   View Specifications
A new standard in acid resistance sheet gasketing. This style was specifically developed to be used in organic and inorganic acid applications. A sheet that outperforms its predecessor in all respects.
3XA Anti-stick finish both sides to ease flange separation.
Max. Temperature: 200 deg C
Max. Pressure: 60 Bar
Non-Asbestos - OTHER   View Specifications
For Steam, water and non-aggressive solvents and a wide range of chemicals.
Red Neoprene - Red Neoprene   View Specifications
High-grade polymer for oil / fuel applications. Good weathering.
Silicone - Silicone   View Specifications
Dielectric properties are of primary importance; weather, oxidation, certain oils and chemicals; shelf storage life is greater than natural or synthetic rubbers; stays soft and flexible when stressed and exposed to outdoor weathering for long periods of time.
Sponge-Neo 25 - Sponge-Neo 25
This industrial type neoprene sponge is oil resistant and durable.
Top Mic - Klinger Top Mic   View Specifications
A combination of specially selected mica, synthetic fibres and fillers to give a sealing material with outstanding flexibility and excellent stability in steam.  Plain or with wire reinforced.
Velemoid/Flexoid - Velemoid/Flexoid   View Specifications
Excellent oil and fuel resistance. 
Available in roll or sheet form over a wide range of thicknesses.
 
Back to the Top
HomeFindLogin