Moulding a Future in Quality

 


 

info@gentechpu.com

ISO 9001:2008

 


 

barry@gentechpu.com

 

 

 

 

 

 

 

 

Company ProfileHomeFindLogin  
 Product Catalogue
Acetal/Delrin - Acetal/Delrin   View Specifications
Acetal products provide high strength and stiffness coupled with enhanced dimensional stability and ease of machining. ACETAL exhibits properties such as low moisture absorption, high strength and stiffness, abrasion resistance, natural lubricant and high mechanical strength. It is easy to machine and is excellent for close-tolerance machined parts.
Ertalyte - Black Ertalyte   View Specifications
The specific properties of this virgin crystalline PET make it specially suitable for the manufacture of mechanical precision parts which have to sustain high loads and / or are subject to wear.
Ertalyte - White Ertalyte   View Specifications
The specific properties of this virgin crystalline PET make it specially suitable for the manufacture of mechanical precision parts which have to sustain high loads and / or are subject to wear.
Glass Reinforced - Glass Reinforced
These High Density Glass reinforced rods are used on the VC Conveyor Belt.  Gentech supplies rods cut to length.
Nylon/Nylatron - Nylatron   View Specifications
Nylatron offers high load bearing capabilities (4000 psi), good strength and rigidity, and a low coefficient of friction. Nylatron should be considered for high load applications where minimal impacting exists.
Nylon/Nylatron - Nylatron GSM   View Specifications
Nylatron GSM contains finely divided particles of molybdenum disulphide to enhance its bearing and wear behaviour without impairing the impact and fatigue resistance inherent to unmodified cast nylon grades. It is a very commonly used grade for gears, bearings, sprockets and sheaves.
Nylon/Nylatron - Nylon Black
Nylon's toughness, low coefficient of friction and good abrasion resistance make it an ideal replacement for a wide variety of materials from metal to rubbers.
Nylon/Nylatron - Nylon Natural   View Specifications
Nylon's toughness, low coefficient of friction and good abrasion resistance make it an ideal replacement for a wide variety of materials from metal to rubbers.
Perspex - Perspex   View Specifications
A transparent thermoplastic acrylic resin.
Polyethylene/HDPE - HDPE   View Specifications
High Density Polyethylene (HDPE) is a corrosion resistant material that has higher impact strength, and a higher operating temperature than LDPE. It has excellent tensile strength, energy absorption, abrasion resistance and resistance to stress cracks. It has very good chemical, excellent machinability, low coefficient of friction and is self lubricating.
Polyethylene/HDPE - HDPE Grade 300
HDPE Grade 300 is a very rigid material available in large sheets for general use in plant engineering, tank construction and waste water industry, where all round chemical resistance and weatherability are required.
Polyethylene/HDPE - HDPE Grade 500
HDPE Grade 500 with excellent mechanical properties, supported by rigidity and creep resistance make this polyethylene ideal for use in the food industry as cutting boards, underlays in food preparation and machined parts.
Polyethylene/HDPE - HDPE Grade 1000
HDPE Grade 1000, general purpose UHMWPE, is suited to engineered applications where its unique properties of excellent impact strength, wear and abrasion resistance are required.
Polyethylene/HDPE - Polyethylene Black   View Specifications
High mechanical strength, stiffness and hardness
Very good creep resistance
Excellent wear resistance
Very good dimensional stability
Resistance to acids
Good electrical insulating properties
Physiologically inert (suitable for food contact)
Good resistance to high energy radiation
Low and constant coefficient of friction
Polyethylene/HDPE - Polyethylene Natural   View Specifications
High mechanical strength, stiffness and hardness
Very good creep resistance
Excellent wear resistance
Very good dimensional stability
Resistance to acids
Good electrical insulating properties
Physiologically inert (suitable for food contact)
Good resistance to high energy radiation
Low and constant coefficient of friction
Polyethylene/HDPE - UHMWPE   View Specifications
UHMWPE is an Ultra High Molecular Weight Polyethylene. It performs well under the most rigorous conditions of wear and environment because of its unique combination of physical and mechanical properties. It has the highest known impact strength of any thermoplastic currently available, in addition, to high resistance to abrasion, demonstrating only negligible weight loss when subjected to abrasion against copper, brass or steel. It has a very low coefficient of friction and extremely low moisture absorption. UHMWPE is particularly effective where no lubrication is available, or during operation in the presence of water.
Used widely for Gears, bearing, bushing, conveyor... more»
Polyprop - Polyprop   View Specifications
Polypropylene offers a combination of outstanding physical, chemical, mechanical, thermal and electrical properties not found in any other thermoplastic. It is highly resistant to corrosive materials, and has high temperature resistance and tensile strength.
Polypropylene Is used widely as Acid Tank/Line-up, Battery Cases, Ducts, Rinse Tubes, Fume Hoods, Machined Parts, Metal Plating Barrels, Scrubbers and Scrub Stations. Excellent for any use with corrosive materials.
PTFE (Teflon) - PTFE (Teflon)   View Specifications
Teflon PTFE (polytetrafluoroethylene) is a fluorocarbon. It offers superior heat resistance (up to 500 F/260 C) coupled with excellent chemical resistance and lubricant. Very few materials will stick to it.  It is inert to almost all chemicals, cannot be dissolved, and exhibits no moisture absorption.
PVC - PVC   View Specifications
High rigidity and strength in comparison with other thermoplastics.  Very good electrical insulation properties and a high resistance to acid, dyes and salt solutions.  It is self extinguishing when flame is withdrawn and easily Processable.
Suitable for applications in the food and beverage industry.
Torlon - Torlon   View Specifications
 
 
Tufnol - Tufnol
Strong, rigid and with good electrical insulation properties. Not recommended for use where toughness and high stress is present. Comes in a variety of grades for different applications.
 
Back to the Top
HomeFindLogin