Moulding a Future in Quality

 


 

info@gentechpu.com

ISO 9001:2008

 


 

barry@gentechpu.com

 

 

 

 

 

 

 

 

Company ProfileHomeFindLogin  
 Serving Industries
Bump Stops - PU - Bump Stops - PU
These Bump Stops are usually supplied in a rubber material. The rubber often absorbs oil, which results in de-bonding.
Gentech manufactures Bump Stops from a tough elastomer that is oil resistant and durable, ensuring much longer life.
Bushings - PTFE Bush   View Specifications
Teflon PTFE (polytetrafluoroethylene) is a fluorocarbon. It offers superior heat resistance (up to 500 F/260 C) coupled with excellent chemical resistance and lubricant. Very few materials will stick to it.  It is inert to almost all chemicals, cannot be dissolved, and exhibits no moisture absorption.
Curtains - PVC - Blue
These vinyl curtains are extremely tough that ensures the safety of workers outside of the dangerous workstation.
Extrusions - Silicone - Extruded Profiles - Sil   View Specifications
Our extrusion equipment can produce Extruded Rubber Products in all shapes.  Our extrusions meet the most rigid specifications, as well as all extruded rubber commercial standards.
Gasket Sheeting -
 
 
Gaskets - PU - PU
A urethane gasket made of a tough, flexible and durable urethane foam.
Matting - Instant Matting   View Specifications
High-protection Instant Mat is virtually indestructible and impervious to every type of dirt and liquid. It can be used in a multitude of applications including factory floor covering, assembly and packaging lines, and as floor mats for trucks and delivery vans.
Manufactured from high-quality PVC, Instant Mat offers the perfect solution for problem floors that have to withstand the destructive effect of grease, heavy dirt, liquid build-up and chemicals.
O-Rings - PU
Polyurethane is the toughest, most abrasion-resistant, and most extrusion-resistant of all elastomeric sealing materials. Polyurethane O-rings are used in a wide variety of products, including quick-disconnect hydraulic fittings, hydraulic cylinders and valves and pneumatic tools.
O-Rings - Viton   View Specifications
Viton has become one of the most widely used seal materials in the world because of its excellent chemical resistance and outstanding upper temperature limit.
Pipefix - Pipefix Packs   View Specifications
Pipefix is a revolutionary new emergency repair kit made from a resin impregnated fibreglass tape, which is suitable for use in automotive, tyres and textile industries as well as mining, marine and domestic.
The one step application method ensures rapid and secure repairs to leaking pipes without the usual added fuss of measuring, messing, cleaning-up and waiting. It is chemically resistant to most acids and chemicals; however, it is not suitable for Acetic and Formic Acid, Ammonia, Cresol, Methylene Chloride or Acetone.
Pipefix - Pipefix Rolls   View Specifications
Pipefix is a revolutionary new emergency repair kit made from a resin impregnated fibreglass tape, which is suitable for use in automotive, tyres and textile industries as well as mining, marine and domestic.
The one step application method ensures rapid and secure repairs to leaking pipes without the usual added fuss of measuring, messing, cleaning-up and waiting. It is chemically resistant to most acids and chemicals; however, it is not suitable for Acetic and Formic Acid, Ammonia, Cresol, Methylene Chloride or Acetone.
Pneumatic/Hydraulic Seals - Chevrons - PU
Vee packings can withstand higher axial and radial loads than U-rings and are classified as heavy-duty rod or cylinder seals. Using two or more rings in a set, combined with male and female header rings, can increase the sealing at low pressures as well as the pressure rating. Also called chevron seals.
Pneumatic/Hydraulic Seals - Cup Seal Imperial - PU   View Specifications
Cup seals are one of the oldest types of piston head seal, and are renowned for their ability to perform well in arduous applications.  Easy to install, cup seals offer a long service life
and are available in a wide range of sizes.  Our polyurethane has a built-in lubricant that reduces equipment wear and therefore extends seal life.
Pneumatic/Hydraulic Seals - Cup Seal Other
Cup Seals are designed as a piston seal, suitable for either single or double acting, medium duty applications.
Pneumatic/Hydraulic Seals - Hat Seal - PU
Our polyurethane has a built-in lubricant that reduces equipment wear and therefore extends seal life.
We manufacture a wide range of seals to suit most equipment in the curing department such as lowering cylinders, stripping arms & knockout cylinders.
Pneumatic/Hydraulic Seals - Seal Kit - PU
Our Seal Kits consist of all replaceable sealing components, ensuring ease of fitment for the maintenance team.
Pneumatic/Hydraulic Seals - U-Seal Piston Imperial - PU   View Specifications
The U-Seal has been an integral part of hydraulic and pneumatic systems for many years. It has a symmetrical lip profile with chamfered sealing edges.  Our polyurethane has a built-in lubricant that reduces equipment wear and therefore extends seal life.
Pneumatic/Hydraulic Seals - U-Seal Rod Imperial - PU   View Specifications
The U-Seal has been an integral part of hydraulic and pneumatic systems for many years. It has a symmetrical lip profile with chamfered sealing edges.  Our polyurethane has a built-in lubricant that reduces equipment wear and therefore extends seal life.
Pneumatic/Hydraulic Seals - U-Seal Rod Metic - PU   View Specifications
The U-Seal has been an integral part of hydraulic and pneumatic systems for many years. It has a symmetrical lip profile with chamfered sealing edges.  Our polyurethane has a built-in lubricant that reduces equipment wear and therefore extends seal life.
Pneumatic/Hydraulic Seals - U-Seal Rod Other
Rod seals are radial seals.  The seal is press-fit into a housing bore with the sealing lip contacting the shaft. Also referred to as a shaft seal.
Press Die Springs - Plastic Springs 90A   View Specifications
 
Press Die Springs - Pop-on Strippers   View Specifications
These PU Strippers generate high holding pressures on the steel sheet and strip the pressed part cleanly from the punch.  Simply push the Stripper onto the punch shank, and the first stroke of the operation forces the punch tip through the stripper base.
Press Die Springs - Rubber Springs 70A   View Specifications
These PU Die Springs are manufactured from a special Urethane that ensures the Spring rebounds back to its original size, cycle after cycle.
Generally, the softer material (known as Rubber Springs) is used when the stroke is slightly longer than usual, but then the Spring has less compressive force.
Rods - Plastic - HDPE   View Specifications
High Density Polyethylene (HDPE) is a corrosion resistant material that has higher impact strength, and a higher operating temperature than LDPE. It has excellent tensile strength, energy absorption, abrasion resistance and resistance to stress cracks. It has very good chemical, excellent machinability, low coefficient of friction and is self lubricating.
Rollers - PU - Roller - PU
Resistant to high pressure wear cutting and resilience is good. Application of the rollers are, conveyor rollers, mechanical drive rollers and high pressure rollers.
Sheeting - Plastic - Coroplast   View Specifications
Coruplas has applications in signage, packaging, printing, advertising, point of sale, storage, transport and general industrial areas. As a protection sheet it is used in the building trade for protection of floors, doors, pillars, etc., and in associated trades is used as anti-scuff sheets between layers of brick, tile etc.
Sheeting - Plastic - Perspex   View Specifications
A transparent thermoplastic acrylic resin.
Sheeting - Plastic - Polycarbonate   View Specifications
High impact thermoplastic, machinable, thermoformable, good light transmission & dimensional stability.
Highest impact rating of all transparent thermoplastics for burglar-resistant glazing, impact shields, electronic housings., machine guards.
Sheeting - Plastic - Polyethylene HDPE   View Specifications
High Density Polyethylene (HDPE) is a corrosion resistant material that has higher impact strength, and a higher operating temperature than LDPE. It has excellent tensile strength, energy absorption, abrasion resistance and resistance to stress cracks. It has very good chemical, excellent machinability, low coefficient of friction and is self lubricating. It is water/salt resistance. It is easy to fabricate.
Sheeting - Plastic - Polypropylene   View Specifications
Polypropylene offers a combination of outstanding physical, chemical, mechanical, thermal and electrical properties not found in any other thermoplastic. It is highly resistant to corrosive materials, and has high temperature resistance and tensile strength.
Polypropylene is used widely as Acid Tank/Line-up, Battery Cases, Ducts, Rinse Tubes, Fume Hoods, Machined Parts, Metal Plating Barrels, Scrubbers and Scrub Stations. Excellent for any use with corrosive materials.
Sheeting - PU - Cast 2mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 3mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 4mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 5mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 6mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 7mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 8mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 9mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 10mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 12mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 13mm - 15mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 16mm - 20mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 21mm - 25mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 26mm - 30mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 31mm - 40mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 41mm - 50mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 51mm - 60mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 61mm - 100mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - Silicone - Sheeting - Sil   View Specifications
Dielectric properties are of primary importance; weather, oxidation, certain oils and chemicals; shelf storage life is greater than natural or synthetic rubbers; stays soft and flexible when stressed and exposed to outdoor weathering for long periods of time.
Sleeves & Tubing - PU - Sleeves & Tubing
 
Technical Maintenance Products - Belt Grip
Designed to eliminate slippage on any belt drives.  Suitable for pumps, generators, compressors, fans, etc.
Technical Maintenance Products - Electric Motor Cleaner
Removes grease, sludge, dirt from operating (or disassembled) motors and electrical systems.
Wheels - Engineering Plastic
 
Wheels - Linishing - PU
This Polyurethane Linishing Wheel which Gentech manufactures lasts considerable longer than rubber.  Wheel for linishing non ferrous metal parts.  Improves belt life and leaves smooth, shadow free finish.
Wheels - PU
Our wheels have excellent wear abilities, resistant to oil and chemicals. They keep long drive with high speed.
Applications of the wheels are, light and heavy duty wheels, elevator pulleys, and all kinds of mechanical elastic wheels.
 
Back to the Top
HomeFindLogin