Moulding a Future in Quality

 


 

info@gentechpu.com

ISO 9001:2008

 


 

barry@gentechpu.com

 

 

 

 

 

 

 

 

Company ProfileHomeFindLogin  
 Serving Industries
Bellows - Bellows
These fabricated bellows provide protection of hydraulic rods and sliding beds against dust, water and swarf.  Generally made to order.
Belting - PU - Royer Belt
 
Belzona Metal Repair Products - Ceramic R-Metal   View Specifications
Ceramic R-Metal is a repair system designed for rebuilding metals damaged by erosion-corrosion.
Belzona Metal Repair Products - Ceramic S-Metal   View Specifications
Ceramic R-Metal is a repair system designed for rebuilding metals damaged by erosion-corrosion.
Belzona Metal Repair Products - Degreaser/Cleaner   View Specifications
Solvent for degreasing.
Belzona Metal Repair Products - High Temp Coating   View Specifications
Coating system for high temperature equipment handling water and aqueous solutions.
Belzona Metal Repair Products - Other
Metal erosion is a continual problem in Industry and often results in costly equipment having to be replaced, such as pumps, valves and pipes.
Belzona Metal Repair Products - SR Elastomer   View Specifications
A two-part, rapid curing elastomeric material for repairing and rebuilding rubber components.  Allows repaired component to be put back into service almost immediately.
Belzona Metal Repair Products - Super E-Metal   View Specifications
Super E-Metal is a rapidly solidifying repair system for emergency and permanent bonding, repairing or rebuilding of all ferrous and non-ferrous metals.
Belzona Metal Repair Products - Super Metal   View Specifications
Engineering grade repair system for repairing and rebuilding machinery and equipment.
Billets & Bushes - PU - Billets - PU
 
Billets & Bushes - PU - Washers - PU
Gentech manufactures washers from a special grade of elastomer.  Washers are disks placed beneath a nut, an axle bearing, or a joint, to relieve friction, prevents leakage, isolate, prevent loosening or distribute pressure.
Cell Carriers - Injection Moulded
 
Cell Carriers - PU
 
Couplings - PU - Coupling Bush
The function of a Bush Coupling is to transmit torque from one shaft to another in cases where limited misalignment may occur and also to absorb shock loads.
Gentech manufactures Polyurethane Bushes that fit into recesses on the one side of the Bush Coupling, whilst a high tensile steel bolt fits into the PU bush from the other side, transmitting the torque through the bolt to the machine input shaft. The Polyurethane Bush absorbs shock loads, vibrations and slight misalignment.
Covers - Battery Terminal - Battery Terminal Cover
 
Cut Gasket - Red Neoprene   View Specifications
Red Neoprene is general purpose neoprene sheeting.  A good temperature, oil and a wide range of chemical resistance for use as flange gaskets, scraper curtains, mats, sleeves and linings.
Document Holder - Document Holders
Our Document Holders are made from clear impact resistant acrylic and can easily be attached to the side of a machine, or installed at a workstation.

Operators can easily view spec sheets or instructions without handling the documents, thereby preventing the paperwork from being soiled.
Horizontal and Vertical Holders are available.
Document Holder - A3 Doc Holders
Our Document Holders are made from clear impact resistant acrylic and can easily be attached to the side of a machine, or installed at a workstation.

Operators can easily view spec sheets or instructions without handling the documents, thereby preventing the paperwork from being soiled.
Horizontal and Vertical Holders are available.
Document Holder - A4 Doc Holders
Our Document Holders are made from clear impact resistant acrylic and can easily be attached to the side of a machine, or installed at a workstation.

Operators can easily view spec sheets or instructions without handling the documents, thereby preventing the paperwork from being soiled.
Horizontal and Vertical Holders are available.
Document Holder - A5 Doc Holders
Our Document Holders are made from clear impact resistant acrylic and can easily be attached to the side of a machine, or installed at a workstation.

Operators can easily view spec sheets or instructions without handling the documents, thereby preventing the paperwork from being soiled.
Horizontal and Vertical Holders are available.
Engineering Felt - Engineering Felt
Engineering Felt is a textile structure composed entirely of fibres physically interlocked and consolidated by the utilization of mechanical work, chemical action and moisture without the use of weaving, stitching, thermal bonding or adhesives.
Extrusions - Extruded Rectangles
Our extrusion equipment can produce Extruded Rubber Products in all shapes.  Our extrusions meet the most rigid specifications, as well as all extruded rubber commercial standards.
Gasket Sheeting -
 
 
Glass Cloth - Adhesive - 3 Thou   View Specifications
We supply in roll or sheet form, plain or adhesive backed.
Glass Cloth - Adhesive - 5 Thou   View Specifications
We supply in roll or sheet form, plain or adhesive backed.
Glass Cloth - Adhesive - 10 Thou   View Specifications
We supply in roll or sheet form, plain or adhesive backed.
Glass Cloth - Plain - 3 Thou   View Specifications
We supply in roll or sheet form, plain or adhesive backed.
Glass Cloth - Plain - 5 Thou   View Specifications
We supply in roll or sheet form, plain or adhesive backed.
Glass Cloth - Plain - 10 Thou   View Specifications
We supply in roll or sheet form, plain or adhesive backed.
Leak Test Seals - Leak Test Seal - PU
Leak Test Seals are used in the Automotive Industry to test for leaks on exhausts and pipes.
Mountings - Anti-vibration
These anti-vibration mountings are simple in structure and can be widely used bringing about excellent effects in prevention of vibration, shock and noise control of machinery and equipment.
Press Die Springs - Plastic Springs 90A   View Specifications
 
Press Die Springs - Plastic Springs Rods
Besides the Plastic and Rubber Die Springs that are made to standard sizes, Gentech also manufacture longer rods which enable the customer to be more flexible with his dimensions.  These lengths of rods have standard centre holes as well.
Rods - Engineering Plastic - Polyprop   View Specifications
Polypropylene offers a combination of outstanding physical, chemical, mechanical, thermal and electrical properties not found in any other thermoplastic. It is highly resistant to corrosive materials, and has high temperature resistance and tensile strength.
Polypropylene Is used widely as Acid Tank/Line-up, Battery Cases, Ducts, Rinse Tubes, Fume Hoods, Machined Parts, Metal Plating Barrels, Scrubbers and Scrub Stations. Excellent for any use with corrosive materials.
Rods - Engineering Plastic - Tufnol
Strong, rigid and with good electrical insulation properties. Not recommended for use where toughness and high stress is present. Comes in a variety of grades for different applications.
Rollers - Conveyor Roller - EP
Wherever material has to be moved, conveyed or accumulated, conveyor rollers are used.
Rollers - Header Roller - PU
 
Rollers - PU
Resistant to high pressure wear cutting and resilience is good. Application of the rollers are, conveyor rollers, mechanical drive rollers and high pressure rollers.
Rollers - Split Roller
 
Scrapers - Scraper - Plastic Coated Metal
 
Scrapers - Scraper Blades - EP
Scrapers are important where there is a build up of sticky or muddy products on the top surface of belts.  Our Plastic and Polyurethane scraper blades are widely used.
Scrapers - Scraper Blades - PU
Scrapers are important where there is a build up of sticky or muddy products on the top surface of belts.  Our Plastic and Polyurethane scraper blades are widely used.
Seal-lon PTFE Continuous - Flat-Adhesive
Seal-lon is a pliable PTFE flat cord with or without adhesive backing and is used for making quick and easy gaskets and seals for flanges and covers.
Seal-lon fills voids and is effective on irregular surfaces.
Sheeting - Engineering Plastic - Coroplast Grey   View Specifications
Coruplas has applications in signage, packaging, printing, advertising, point of sale, storage, transport and general industrial areas. As a protection sheet it is used in the building trade for protection of floors, doors, pillars, etc., and in associated trades is used as anti-scuff sheets between layers of brick, tile etc.
Sheeting - Engineering Plastic - Coroplast Black   View Specifications
Coruplas has applications in signage, packaging, printing, advertising, point of sale, storage, transport and general industrial areas. As a protection sheet it is used in the building trade for protection of floors, doors, pillars, etc., and in associated trades is used as anti-scuff sheets between layers of brick, tile etc.
Sheeting - Engineering Plastic - Nylon Natural   View Specifications
Nylon's toughness, low coefficient of friction and good abrasion resistance make it an ideal replacement for a wide variety of materials from metal to rubbers.
Sheeting - Engineering Plastic - Perspex UHI   View Specifications
A transparent thermoplastic acrylic resin.
Sheeting - Engineering Plastic - Polycarbonate   View Specifications
High impact thermoplastic, machinable, thermoformable, good light transmission & dimensional stability.
Highest impact rating of all transparent thermoplastics for burglar-resistant glazing, impact shields, electronic housings., machine guards.
Sheeting - Engineering Plastic - Polyethylene HDPE   View Specifications
High Density Polyethylene (HDPE) is a corrosion resistant material that has higher impact strength, and a higher operating temperature than LDPE. It has excellent tensile strength, energy absorption, abrasion resistance and resistance to stress cracks. It has very good chemical, excellent machinability, low coefficient of friction and is self lubricating. It is water/salt resistance. It is easy to fabricate.
Sheeting - Engineering Plastic - Polyethylene Natural   View Specifications
High mechanical strength, stiffness and hardness
Very good creep resistance
Excellent wear resistance
Very good dimensional stability
Resistance to acids
Good electrical insulating properties
Physiologically inert (suitable for food contact)
Good resistance to high energy radiation
Low and constant coefficient of friction
Sheeting - Engineering Plastic - Polypropylene   View Specifications
Polypropylene offers a combination of outstanding physical, chemical, mechanical, thermal and electrical properties not found in any other thermoplastic. It is highly resistant to corrosive materials, and has high temperature resistance and tensile strength.
Polypropylene is used widely as Acid Tank/Line-up, Battery Cases, Ducts, Rinse Tubes, Fume Hoods, Machined Parts, Metal Plating Barrels, Scrubbers and Scrub Stations. Excellent for any use with corrosive materials.
Sheeting - Engineering Plastic - PTFE (Teflon)   View Specifications
Teflon PTFE (polytetrafluoroethylene) is a fluorocarbon. It offers superior heat resistance (up to 500 F/260 C) coupled with excellent chemical resistance and lubricant. Very few materials will stick to it.  It is inert to almost all chemicals, cannot be dissolved, and exhibits no moisture absorption.
Sheeting - Engineering Plastic - UHMWPE   View Specifications
UHMWPE is an Ultra High Molecular Weight Polyethylene. It performs well under the most rigorous conditions of wear and environment because of its unique combination of physical and mechanical properties. It has the highest known impact strength of any thermoplastic currently available, in addition, to high resistance to abrasion, demonstrating only negligible weight loss when subjected to abrasion against copper, brass or steel. It has a very low coefficient of friction and extremely low moisture absorption. UHMWPE is particularly effective where no lubrication is available, or during operation in the presence of water.
Used widely for Gears, bearing, bushing, conveyor... more»
Sheeting - PU - Cast 2mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 3mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 4mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 5mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 6mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 7mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 8mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 9mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 10mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 12mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 13 - 15mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 16 - 20mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 21 - 25mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 26 - 30mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 31 - 40mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 41 - 50mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 51 - 60mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - PU - Cast 61 - 100mm thk
We process specification and commercial grades of elastomer sheet jointings.
Sheeting - Rubber - Gum Stock   View Specifications
A rubber compound containing only those ingredients necessary for vulcanization and small amounts or other ingredients such as process aids, colours and antioxidants. It contains no filler, reinforcing agents or plasticizers.
Sheeting - Rubber - Neoprene   View Specifications
One of the earliest of the synthetic materials to be developed as an oil resistant substitute for Natural Rubber, Neoprene is a homopolymer of chloroprene (chlorobutadiene).
Temperature Range: Standard Compound: 45 F to +250 F. (Dry Heat Only)
Hardness (Shore A): 40 to 90.
Features: Neoprene can be used in innumerable sealing applications, due to its broad base of such desirable working properties as: moderate resistance to petroleum oils; good resistance to ozone, sunlight and oxygen aging; relatively low compression set; good resilience; and reasonable production cost.
Due to its excellent resistance to  Ammonia, Neoprene is also widely accepted as... more»
 
Sheeting - Rubber - Nitrile   View Specifications
Nitrile rubber, or Buna-N,is a synthetic rubber copolymer of acrylonitrile (CAN) and butadiene.  This copolymer of butadiene and acrylonitrile is recommended when excellent resistance to petroleum oils and gasoline is required.  Solvent resistance increases and low temperature flexibility decreases in basic polymers with higher acrylonitrile content. Low temperature resistance is inferior to natural rubber, but NBR can be compounded to give adequate performance in this area.
 
Trays - Trays - EP
 
Vacuum Cups - PU - Metal - 55mm
 
 
Vacuum Cups - PU - Metal - 68mm
 
Vacuum Cups - PU - Metal - 100mm
 
Vacuum Cups - PU - Metal - 157mm
 
Vacuum Cups - PU - Metal - 216mm
 
Vacuum Cups - PU - Metal - 330mm
 
Vacuum Cups - PU - Standard - 19mm
 
Vacuum Cups - PU - Standard - 20mm
 
Vacuum Cups - PU - Standard - 20mm
 
Vacuum Cups - PU - Standard - 30mm
 
Vacuum Cups - PU - Standard - 34mm
 
Vacuum Cups - PU - Standard - 34mm
 
Vacuum Cups - PU - Standard - 35mm
 
Vacuum Cups - PU - Standard - 38mm
 
Vacuum Cups - PU - Standard - 60mm
 
 
Vacuum Cups - PU - Standard - 63mm
 
Vacuum Cups - PU - Standard - 67mm
 
 
Vacuum Cups - PU - Standard - 100mm
 
Vacuum Cups - PU - Standard - 185mm
 
 
Wheels - Bandsaw Wheel
The bandsaw is made up of  2 wheels, a blade, and a table. As the wheels rotate, the blade also rotates and cuts the wood.
Wheels - Metal -
Our wheels have excellent wear abilities, resistant to oil and chemicals. They keep long drive with high speed.
Applications of the wheels are, light and heavy duty wheels, elevator pulleys, and all kinds of mechanical elastic wheels.
Wire Brush - PU Encapsulated - Wire Brush - PU
Encapsulated Wire Brushes provide an aggressive cutting action for heavy deburring, surface blending, surface preparation, rubber and plastic flash removal, and weld preparation. The wires are bonded in place with a synthetic elastomer that wears away gradually during use, exposing a short length of the wires. Encapsulated brushes are most effective on relatively flat surfaces or where a controlled brushing surface is required.
Gentech offers a complete range of power brushes for Industrial use, including Wheel, End, Cup, Shaft Mount, and Tube brushes.   
Gentech Wire Brushes increase productivity by 25% or more, and are far safer than bare wires that... more»
 
Back to the Top
HomeFindLogin