Moulding a Future in Quality

 


 

info@gentechpu.com

ISO 9001:2008

 


 

barry@gentechpu.com

 

 

 

 

 

 

 

 

Company ProfileHomeFindLogin  
 Serving Industries
Bag Contol Cylinder Packing - In/Outward
These PTFE Seals are wedge shaped and are mostly used in the Bag Control Cylinder Packings.
Bag Contol Cylinder Packing - O-Ring (PTFE)   View Specifications
PTFE is a popular O-Ring which is white in colour. The PTFE O-Rings are popular for use in applications which require a chemically resistant and non-compressible material.
It is also very tough and abrasive resistant.
Bag Contol Cylinder Packing - Seal Kits
Our Seal Kits consist of all replaceable sealing components, ensuring ease of fitment for the maintenance team.
Bag Contol Cylinder Packing - Slide Pipe/Feedline
All inward and outward pointing seals as well as feed-line seals, Chevrons and O-Rings are manufactured from virgin PTFE / Teflon.
Bladder Clamp Ring Gasket - Bladder Clamp Ring Gasket
This seal is used in the Bladder Clamp Ring Assembly prior to lowering into the press.

The seals were previously manufactured from a fabric-reinforced rubber. Subsequently, these seals have been supplied without reinforcing and joined, which resulted in premature failure.

Gentech identified the problem area and with a small modification to the equipment and with the manufacture of an endless seal, the problem has now been completely resolved.
Dome Gaskets - Dome Gaskets
Previously manufactured in rubber, which hardened in a short period and had a limited and inconsistent life span from 1 week to 5 weeks. Besides the loss of steam and downtime for replacing a leaking gasket, the leaking condensate causes major corrosion problems on the base of the press.

Gentech manufactures endless gaskets from a high temperature elastomer, which does not harden and retains its memory to ensure perfect sealing in all conditions. Generally, the life span of our gaskets is from 2-8 months, depending on the condition of the equipment.
Gland Packing Pumps - Braided Aramid/Kevlar   View Specifications
Klinger Style 25 Packing is manufactured from the well-known yellow aramid fibre which is renowned for being an exceptionally strong, yet flexible yarn, allowing it to be used in higher pressure applications than normal braided packings. The steel-like strength of the yarn makes it ideally suitable for use as back-up rings with other types of packing to resist extrusion.
Gland Packing Pumps - Braided Asb/Flax/PTFE   View Specifications
Klinger Style 1010 Packing is manufactured from pure long-fibre white chrysotile asbestos yarn, which is thoroughly lubricated with a high flash point, semi-colloidal mixture of heavy mineral oil and graphite. 
The yarns are individually lubricated and the Klinger-lock principle is used to manufacture the packing, which allows for maximum lubrication, and enables the packing to stay soft even under the most arduous conditions. Its extremely low friction characteristics reduce shaft wear because it eases fabric to metal contact.
Gland Packing Pumps - Braided Graph-2202   View Specifications
TEADIT Style 2202 is the newest generation of graphite packings, specifically designed for very demanding applications.  Its special construction allows use in areas where normal expanded graphite packings fail.  The pure carbon fibres reinforcing the corners and body of this packing, make Style 2202 at least 3 times more resistant to extrusion and also extremely pressure resistant.
Gland Packing Pumps - Braided Graph-3222   View Specifications
Klinger Style 3222 Flexygraf Packing is a unique packing, braided from expanded graphite, giving it capabilities which are without equal when used as a mechanical compression packing. Its effectiveness is a function of its crystalline structure, which gives Klinger Style 3222 Flexygraf Packing the permanent resilience and elasticity so important in ensuring the effectiveness of mechanical packings.
Klinger Style 3222 Flexygraf Packing has permanent resilience, is self-lubricating, chemically inert, relatively soft and compressible, will not wick or leak by capillarity, has an indefinite shelf life and is plaited from pure expanded graphite without resins, fillers or binders. This makes... more»
Gland Packing Pumps - Braided Graph-4322   View Specifications
Klinger Style 4322 is a non-asbestos packing, braided using the Klinger-lock method from pure PTFE. A special technique has been used so that copious quantities of free graphite are incorporated giving the packing markedly better heat transfer properties when compared to other graphitized pure PTFE types. The incorporation of graphite greatly reduces frictional heat, and the temperature of the packing on the sliding surface rises very little above ambient.
Klinger Style 4322 is an extremely supple and conformable packing, making it good for use on worn shafts, and the reduced expansion of the packing within the temperature limits... more»
Gland Packing Pumps - Braided Graph-4330   View Specifications
Klinger Style 4330 is a new generation inter-braided synthetic packing, offering the utility of asbestos, the toughness of aramid fibre, the low friction of carbon fibre, and the chemical resistance and non-staining characteristics of PTFE, making it the first real multi-purpose packing without environmental concerns or premium costs.
Being a soft, pliable fibre, individually coated with PTFE lubricants and further lubricated with a paraffinic oil, it readily reacts to even the slightest of gland pressures, conforms easily to stuffing box configurations, does not cause excessive shaft wear, resists extrusion, is clean to handle and will not leach... more»
Gland Packing Valves - Braided Asb/Inc   View Specifications
Klinger Style 1028 is the ideal high-temperature, high-pressure valve stem packing.  Constructed in the braid-over-core method, the jacket is manufactured from high-grade long fibre asbestos yarn reinforced with inconel wire, ensuring high tensile strength and corrosion resistance at elevated temperatures and pressures.
Gland Packing Valves - Braided PTFE   View Specifications
Klinger Style 54S is manufactured in Klinger-lock construction from pure PTFE filament yarns which have been surface treated with PTFE dispersion prior to braiding. This, along with modern technology used in the braiding process, results in an almost perfectly square packing ensuring increased sealing contact with reduced gland pressures.
Gland Packing Valves - Valvelon (PTFE)   View Specifications
Valve Seal has a braided jacket of PTFE wrapped around a pliable core of PTFE. It is chemically resistant and easily compresses into uneven flanges to fill voids. Because of its low friction characteristics and because it never hardens, it is most ideal for Valve Gland Packing.
Pot Test Seal - Pot Test Seal
 
Sinclair Valve Diaphrams - Diaphrams
Gentech manufactures all sizes of Diaphragms for the Sinclair Collins & Lesley Valves from nylon reinforced, oil resistant neoprene.
Turn-up Seal - Turn-up Seal
 
 
Back to the Top
HomeFindLogin