Moulding a Future in Quality

 


 

info@gentechpu.com

ISO 9001:2008

 


 

barry@gentechpu.com

 

 

 

 

 

 

 

 

Company ProfileHomeFindLogin  
 Serving Industries
Bias Blades - Bias Blades
Circular bias cutter blades are manufactured using high alloy tool steel blades with consistent, fully ground teeth. Cutting edges have minimal runout, providing longer edge life. Blades are reversible for twice the life.
Expanding Air Shafts - Complete Unit
The range of pneumatic and mechanical expanding shafts offers solutions for all winding and unwinding of materials on reels and cores.
Expanding Air Shafts - Segments/Lugs
These lugs are manufactured from a high of elastomer that is very tough and durable.  These lugs are utilized in the expandable airshafts units at the wind up and let-off stations.  When inflating the expander bar tubing, the lugs are pushed forward towards the outer surface, preventing the shells and bobbins from moving.
Expanding Air Shafts - Tubing - Rubber
 
Expanding Air Shafts - Tubing - Silicone
 
Hanger Blocks - Hanger Blocks
These blocks are utilized in the tyre-building department for the let-off and wind-up bobbins. The blocks were previously machined from Engineering Plastics that proved to be costly.
Gentech moulds Hanger Blocks from a wear resistant material with no further machining required for fitment.

Plants have various shapes and sizes and Gentech will mould to customers drawings and requirements.
Plyfinger Wear Rings - NRM Plyfinger Wear Rings
 
Plyfinger Wear Rings - PRIC Plyfinger Wear Rings
 
Retract Bands - Retract Bands
These Neothane Springs are used in the tyre-building department for retracting segments on the expander head.
Sponge Rollers - Other - PU Sponge Complete
 
Sponge Rollers - Other - PU Sponge Rebond
 
Sponge Rollers - Other - Sponge Complete
 
Sponge Rollers - Other - Sponge Rebond
 
Sponge Rollers - SAI - PU Sponge Complete
These rollers are predominantly used on the 1st Stage and SAI Tyre building machines.
In the past, the previous rollers were very costly with long lead times.

Gentech manufactures an integral skin sponge roller from tough elastomer, which is very durable.
Sponge Rollers - SAI - PU Sponge Rebond
These rollers are predominantly used on the 1st Stage and SAI Tyre building machines.
In the past, the previous rollers were very costly with long lead times.

Gentech manufactures an integral skin sponge roller from tough elastomer, which is very durable.
Stitcher Cores - Stitcher Cores
Gentech manufactures a variety of sizes from rubber and polyurethane elastomer for an extended life span.
Stitcher Cores - Stitcher Discs
These discs are manufactured from nylon and fit over the rubber core that deflect and follow the contour of the tyre, removing any air entrapment during the building process.
Stitcher Wheels - Stitcher Wheels
Gentech manufactures a variety of sizes from rubber and polyurethane elastomer for an extended life span.
Vacuum Cups - 25mm
 
Vacuum Cups - 32mm
 
Vacuum Cups - 34mm
 
 
Vacuum Cups - 82mm
 
 
Vacuum Cups - 88mm
 
Vacuum Cups - 105mm
 
Vacuum Cups - 118mm
 
Vacuum Suckers - Tubes
 
Wind-up Shells/Bobbins - Bobbin Inserts - PU
Broken or cracked side flanges are a continual problem when these Reflective Bobbins are full of Stock and are then accidentally dropped.
Gentech's Reflective Bobbin not only has reinforced side Flanges, but also utilizes a unique manufacturing concept that allows the old steel tubing and costly reflectors to be recycled into the new casing.
A major Cost Saving is achieved by using the Gentech Reflector Bobbins.
Wind-up Shells/Bobbins - Bobbins Segment Roller
Broken or cracked side flanges are a continual problem when these Reflective Bobbins are full of Stock and are then accidentally dropped.
Gentech's Reflective Bobbin not only has reinforced side Flanges, but also utilizes a unique manufacturing concept that allows the old steel tubing and costly reflectors to be recycled into the new casing.
A major Cost Saving is achieved by using the Gentech Reflector Bobbins.
Wind-up Shells/Bobbins - Reflective Bobbins-Plastic
Broken or cracked side flanges are a continual problem when these Reflective Bobbins are full of Stock and are then accidentally dropped.
Gentech's Reflective Bobbin not only has reinforced side Flanges, but also utilizes a unique manufacturing concept that allows the old steel tubing and costly reflectors to be recycled into the new casing.
A major Cost Saving is achieved by using the Gentech Reflector Bobbins.
Wind-up Shells/Bobbins - Wind-up Shells
... more»
 
Back to the Top
HomeFindLogin