Moulding a Future in Quality

 


 

info@gentechpu.com

ISO 9001:2008

 


 

barry@gentechpu.com

 

 

 

 

 

 

 

 

Company ProfileHomeFindLogin  
 Serving Industries
Cut Gaskets - Cork/Neocork   View Specifications
The durability and versatility of cork has made it one of the most popular materials for sealing applications. Being a natural product, it possesses many advantages. It can be compounded with a variety of raw materials to provide a comprehensive range of sealing products.  High tensile strength, resistance to many fluids, ability to withstand extremes of temperature - with the natural properties of cork - high compression, good recovery and low load sealing.
Cut Gaskets - Graphonic   View Specifications
These corrugated metal gaskets are designed for superior reliability, even in the most difficult applications. They combine a corrugated metal core with a flexible graphite sealing element.
Cut Gaskets - Insertion Rubber   View Specifications
This rubber product is made of natural rubber with a cloth inner liner, giving the product higher tear strength than ordinary rubber sheeting. Insertion Rubber is used for a variety of applications including matting, packing, gaskets dust curtains and mud flaps.
Nitrile Insertion rubber is used for some gasket and diaphragm applications.
Cut Gaskets - Insulating - Full Face   View Specifications
Full Face Gasket Insulating Set Assembly Suitable for flat face and raised face flanges. This style minimises the ingress of conductive foreign matter between the portion of the flanges outside the raised faces and reduces the risk of bridging.
Cut Gaskets - Insulating - Ring Gasket   View Specifications
Ring Joint Gasket Insulating Set Assembly Insulating oval section ring joint will fit into a standard RTJ Flange ring groove.
Cut Gaskets - Non-Asbestos   View Specifications
For Steam, water and non-aggressive solvents and a wide range of chemicals.
Cut Gaskets - Velemoid/Flexoid   View Specifications
Excellent oil and fuel resistance. 
Available in roll or sheet form over a wide range of thicknesses.
Cut Gaskets - Wire Reinforced   View Specifications
Highest grade, wire reinforced material for extreme service. Recommended for conditions of fluctuating steam pressures and temperatures. Composed of chrysotile asbestos fibre bonded with SBR binder and reinforced with close mesh steel wire.  Both sides treated with special 3xA anti-stick compound - non graphited.
Gasket Sheeting - Cork/Neocork   View Specifications
The durability and versatility of cork has made it one of the most popular materials for sealing applications. Being a natural product, it possesses many advantages. It can be compounded with a variety of raw materials to provide a comprehensive range of sealing products.  High tensile strength, resistance to many fluids, ability to withstand extremes of temperature - with the natural properties of cork - high compression, good recovery and low load sealing.
Gasket Sheeting - Insertion Rubber   View Specifications
This rubber product is made of natural rubber with a cloth inner liner, giving the product higher tear strength than ordinary rubber sheeting. Insertion Rubber is used for a variety of applications including matting, packing, gaskets dust curtains and mud flaps.
Nitrile Insertion rubber is used for some gasket and diaphragm applications.
Gasket Sheeting - Klinger Non-Asbestos   View Specifications
For Steam, water and non-aggressive solvents and a wide range of chemicals.
Gasket Sheeting - Velemoid/Flexoid   View Specifications
Excellent oil and fuel resistance. 
Available in roll or sheet form over a wide range of thicknesses.
Gland Packing Pumps - Braided Aramid/Kevlar   View Specifications
Klinger Style 25 Packing is manufactured from the well-known yellow aramid fibre which is renowned for being an exceptionally strong, yet flexible yarn, allowing it to be used in higher pressure applications than normal braided packings. The steel-like strength of the yarn makes it ideally suitable for use as back-up rings with other types of packing to resist extrusion.
Gland Packing Pumps - Braided Asb/Flax/PTFE   View Specifications
Klinger Style 1010 Packing is manufactured from pure long-fibre white chrysotile asbestos yarn, which is thoroughly lubricated with a high flash point, semi-colloidal mixture of heavy mineral oil and graphite. 
The yarns are individually lubricated and the Klinger-lock principle is used to manufacture the packing, which allows for maximum lubrication, and enables the packing to stay soft even under the most arduous conditions. Its extremely low friction characteristics reduce shaft wear because it eases fabric to metal contact.
Gland Packing Pumps - Braided Graph-2202   View Specifications
TEADIT Style 2202 is the newest generation of graphite packings, specifically designed for very demanding applications.  Its special construction allows use in areas where normal expanded graphite packings fail.  The pure carbon fibres reinforcing the corners and body of this packing, make Style 2202 at least 3 times more resistant to extrusion and also extremely pressure resistant.
Gland Packing Pumps - Braided Graph-3222   View Specifications
Klinger Style 3222 Flexygraf Packing is a unique packing, braided from expanded graphite, giving it capabilities which are without equal when used as a mechanical compression packing. Its effectiveness is a function of its crystalline structure, which gives Klinger Style 3222 Flexygraf Packing the permanent resilience and elasticity so important in ensuring the effectiveness of mechanical packings.
Klinger Style 3222 Flexygraf Packing has permanent resilience, is self-lubricating, chemically inert, relatively soft and compressible, will not wick or leak by capillarity, has an indefinite shelf life and is plaited from pure expanded graphite without resins, fillers or binders. This makes... more»
Gland Packing Pumps - Braided Graph-4322   View Specifications
Klinger Style 4322 is a non-asbestos packing, braided using the Klinger-lock method from pure PTFE. A special technique has been used so that copious quantities of free graphite are incorporated giving the packing markedly better heat transfer properties when compared to other graphitized pure PTFE types. The incorporation of graphite greatly reduces frictional heat, and the temperature of the packing on the sliding surface rises very little above ambient.
Klinger Style 4322 is an extremely supple and conformable packing, making it good for use on worn shafts, and the reduced expansion of the packing within the temperature limits... more»
Gland Packing Pumps - Braided Graph-4330   View Specifications
Klinger Style 4330 is a new generation inter-braided synthetic packing, offering the utility of asbestos, the toughness of aramid fibre, the low friction of carbon fibre, and the chemical resistance and non-staining characteristics of PTFE, making it the first real multi-purpose packing without environmental concerns or premium costs.
Being a soft, pliable fibre, individually coated with PTFE lubricants and further lubricated with a paraffinic oil, it readily reacts to even the slightest of gland pressures, conforms easily to stuffing box configurations, does not cause excessive shaft wear, resists extrusion, is clean to handle and will not leach... more»
Gland Packing Pumps - Braided Graph-4333   View Specifications
Klinger Style 4333 Polyimide Packing is a distinctive packing, braided from organic synthetic polyimide base yarn to which textile properties have been given.  These textile properties improve elongation and tenacious characteristics.
Klinger Style 4333 is another step away from the use of asbestos packing material.  It is clean, easy to handle packing and a very useful and economic alternative to Aramid and PTFE types of packing.
Gland Packing Valves - Braided Asb/Inc   View Specifications
Klinger Style 1028 is the ideal high-temperature, high-pressure valve stem packing.  Constructed in the braid-over-core method, the jacket is manufactured from high-grade long fibre asbestos yarn reinforced with inconel wire, ensuring high tensile strength and corrosion resistance at elevated temperatures and pressures.
Gland Packing Valves - Braided PTFE   View Specifications
Klinger Style 54S is manufactured in Klinger-lock construction from pure PTFE filament yarns which have been surface treated with PTFE dispersion prior to braiding. This, along with modern technology used in the braiding process, results in an almost perfectly square packing ensuring increased sealing contact with reduced gland pressures.
Graphite Die-formed Rings - Graphite Die-formed Rings
Graphite Die-Formed Packing Rings main uses are for dynamic sealing of compressors, pumps and valves.  Packing for the gland boxes of chemical instruments  and for composite sealing to take the place of mechanical sealing.
Graphite Tape/Foil - Graphite Tape/Foil
 
Pipe Fix - Pipe Fix Packs   View Specifications
Pipefix is a revolutionary new emergency repair kit made from a resin impregnated fibreglass tape, which is suitable for use in automotive, tyres and textile industries as well as mining, marine and domestic.
The one step application method ensures rapid and secure repairs to leaking pipes without the usual added fuss of measuring, messing, cleaning-up and waiting. It is chemically resistant to most acids and chemicals; however, it is not suitable for Acetic and Formic Acid, Ammonia, Cresol, Methylene Chloride or Acetone.
Pipe Fix - Pipe Fix Rolls   View Specifications
Pipefix is a revolutionary new emergency repair kit made from a resin impregnated fibreglass tape, which is suitable for use in automotive, tyres and textile industries as well as mining, marine and domestic.
The one step application method ensures rapid and secure repairs to leaking pipes without the usual added fuss of measuring, messing, cleaning-up and waiting. It is chemically resistant to most acids and chemicals; however, it is not suitable for Acetic and Formic Acid, Ammonia, Cresol, Methylene Chloride or Acetone.
Seal-lon PTFE Gasketing - PTFE Gasketing Adhesive
Seal-lon is a pliable PTFE flat cord with or without adhesive backing and is used for making quick and easy gaskets and seals for flanges and covers.
Seal-lon fills voids and is effective on irregular surfaces.
Seal-lon PTFE Gasketing - PTFE Valvelon   View Specifications
Valve Seal has a braided jacket of PTFE wrapped around a pliable core of PTFE. It is chemically resistant and easily compresses into uneven flanges to fill voids. Because of its low friction characteristics and because it never hardens, it is most ideal for Valve Gland Packing.
Soot Blower Packing - Soot Blower Packing
Gentech manufactures Soot Blower Packing from extrusion resistant carbon filled PTFE.
Spiral Wound Gaskets - Type R - Asbestos   View Specifications
Basic construction type, inner and outer diameters are reinforced with several plies of metal without filler to give greater stability and better compression characteristics. Suitable for tongue and groove or male and female or grooved to flat face flange assemblies.
Spiral Wound Gaskets - Type R - Diamond   View Specifications
Basic construction type, inner and outer diameters are reinforced with several plies of metal without filler to give greater stability and better compression characteristics. Suitable for tongue and groove or male and female or grooved to flat face flange assemblies.
Spiral Wound Gaskets - Type R - Graphite   View Specifications
Basic construction type, inner and outer diameters are reinforced with several plies of metal without filler to give greater stability and better compression characteristics. Suitable for tongue and groove or male and female or grooved to flat face flange assemblies.
Spiral Wound Gaskets - Type R - Oval   View Specifications
Basic construction type, inner and outer diameters are reinforced with several plies of metal without filler to give greater stability and better compression characteristics. Suitable for tongue and groove or male and female or grooved to flat face flange assemblies.
Spiral Wound Gaskets - Type R - PTFE   View Specifications
Basic construction type, inner and outer diameters are reinforced with several plies of metal without filler to give greater stability and better compression characteristics. Suitable for tongue and groove or male and female or grooved to flat face flange assemblies.
Spiral Wound Gaskets - Type R - Square   View Specifications
Basic construction type, inner and outer diameters are reinforced with several plies of metal without filler to give greater stability and better compression characteristics. Suitable for tongue and groove or male and female or grooved to flat face flange assemblies.
 
Back to the Top
HomeFindLogin