Moulding a Future in Quality

 


 

info@gentechpu.com

ISO 9001:2008

 


 

barry@gentechpu.com

 

 

 

 

 

 

 

 

Company ProfileHomeFindLogin  
 Serving Industries
Buffer Pads - Buffer Pads
These Bump Stops are usually supplied in a rubber material. The rubber often absorbs oil, which results in de-bonding.
Gentech manufactures Bump Stops from a tough elastomer that is oil resistant and durable, ensuring much longer life.
Chute Lining - PU Coated - Chute Lining - PU Coated
Chute lining protects and cushions the chute from the material being handled.
Conveyor Rollers - Rebonded
Resistant to high pressure wear cutting and resilience is good. Application of the rollers are, conveyor rollers, mechanical drive rollers and high pressure rollers.
Conveyor Scrapers - PU - Conveyor Scraper Blades - PU
Scrapers are important where there is a build up of sticky or muddy products on the top surface of belts.  Our Plastic and Polyurethane scraper blades are widely used.
Coupling Bushes - PU - Coupling Bushes - PU
Unique general-purpose coupling is ideal for use in industrial applications such as pumps, compressors, blowers, mixers and many other drive applications.
Cut Gaskets - Acid Resist   View Specifications
High quality acid controlled swell material. Extensively used by the automotive, paper and chemical industries. Suitable for ceramic and glass flanges.
Cut Gaskets - Cork/Neocork   View Specifications
The durability and versatility of cork has made it one of the most popular materials for sealing applications. Being a natural product, it possesses many advantages. It can be compounded with a variety of raw materials to provide a comprehensive range of sealing products.  High tensile strength, resistance to many fluids, ability to withstand extremes of temperature - with the natural properties of cork - high compression, good recovery and low load sealing.
Cut Gaskets - EPDM   View Specifications
EPDM stands for Ethylene Propylene Diene Monomer. Engineering specifications describe EPDM as "Ideal for outdoor applications because of its excellent resistance to ultra-violet light, ozone, oxidants, and severe weather conditions."
Stays flexible in temperatures from -40 Fahrenheit to 175 Fahrenheit making it easy to install all year round. Unlike other liner materials, it does not contain plasticizers that could make it become brittle with age and cause cracks or splits in the material; threatening aquatic life.
EPDM's flexibility provides more versatility in numerous designs. Unlike preformed liners, it can be easily shaped to fit the unique contours of... more»
Cut Gaskets - Graphonic   View Specifications
These corrugated metal gaskets are designed for superior reliability, even in the most difficult applications. They combine a corrugated metal core with a flexible graphite sealing element.
Cut Gaskets - Insertion Rubber   View Specifications
This rubber product is made of natural rubber with a cloth inner liner, giving the product higher tear strength than ordinary rubber sheeting. Insertion Rubber is used for a variety of applications including matting, packing, gaskets dust curtains and mud flaps.
Nitrile Insertion rubber is used for some gasket and diaphragm applications.
Cut Gaskets - Insulating - Full Face   View Specifications
Full Face Gasket Insulating Set Assembly Suitable for flat face and raised face flanges. This style minimises the ingress of conductive foreign matter between the portion of the flanges outside the raised faces and reduces the risk of bridging.
Cut Gaskets - Insulating - Ring Gasket   View Specifications
Ring Joint Gasket Insulating Set Assembly Insulating oval section ring joint will fit into a standard RTJ Flange ring groove.
Cut Gaskets - Neoprene   View Specifications
One of the earliest of the synthetic materials to be developed as an oil resistant substitute for Natural Rubber, Neoprene is a homopolymer of chloroprene (chlorobutadiene).
Temperature Range: Standard Compound: 45 F to +250 F. (Dry Heat Only)
Hardness (Shore A): 40 to 90.
Features: Neoprene can be used in innumerable sealing applications, due to its broad base of such desirable working properties as: moderate resistance to petroleum oils; good resistance to ozone, sunlight and oxygen aging; relatively low compression set; good resilience; and reasonable production cost.
Due to its excellent resistance to  Ammonia, Neoprene is also widely accepted as... more»
Cut Gaskets - Nitrile   View Specifications
Nitrile rubber, or Buna-N,is a synthetic rubber copolymer of acrylonitrile (CAN) and butadiene.  This copolymer of butadiene and acrylonitrile is recommended when excellent resistance to petroleum oils and gasoline is required.  Solvent resistance increases and low temperature flexibility decreases in basic polymers with higher acrylonitrile content. Low temperature resistance is inferior to natural rubber, but NBR can be compounded to give adequate performance in this area.
Cut Gaskets - Non-Asbestos   View Specifications
For Steam, water and non-aggressive solvents and a wide range of chemicals.
Cut Gaskets - PTFE - Envelope   View Specifications
PTFE envelope gaskets comprise a compressed synthetic fibre gasket material insert with a PTFE envelope. The PTFE envelope protects the gasket from chemical attack. The insert provides the strength and resilience needed for demanding sealing operation.
Cut Gaskets - PTFE - Standard   View Specifications
These cut to size PTFE Gaskets are used in food applications and are also resistant to most acids.
Cut Gaskets - Red Neoprene   View Specifications
Red Neoprene is general purpose neoprene sheeting.  A good temperature, oil and a wide range of chemical resistance for use as flange gaskets, scraper curtains, mats, sleeves and linings.
Cut Gaskets - Silicone   View Specifications
... more»
Cut Gaskets - Sponge-Neo 25
This industrial type neoprene sponge is oil resistant and durable.
Cut Gaskets - Urethane
A urethane gasket made of a tough, flexible and durable urethane foam.
Cut Gaskets - Velemoid/Flexoid   View Specifications
Excellent oil and fuel resistance. 
Available in roll or sheet form over a wide range of thicknesses.
Cut Gaskets - Viton   View Specifications
 
Degreasers - Carbon Remover
Carb-tec dissolves heavy carbon and tacky deposits from engines and machinery.
Degreasers - Emulsifier
Degreases engines and machinery.  It removes oil grease and light carbon build-up.
Degreasers - Industrial - Heavy Duty   View Specifications
PS23 Industro Degreaser is a water-based caustic formulation with high performance / heavy duty degreasing ability and exhibits low toxicity.
Degreasers - Multi-Purpose   View Specifications
Multi-purpose Industrial Water-based Detergent.  It penetrates, emulsifies and removes dirt, oil, wax, mildew, bilge scum, grease and grime.  Used for maintenance and cleaning operations in the food processing, automotive, machine shops and other industries as well as on board ships, in hospitals and schools.
Degreasers - Phosphate Free
Phosphate-free cleaner.  It is a biodegradable industrial cleaner for environmentally sensitive areas.
Gasket Sheeting - Abrasion/Wear resist
Most abrasion resistant materials are composed of SBR, natural rubber or a combination of each. These special service materials are compounded specifically to provide greater wear and tear resistance.
Gasket Sheeting - Cork/Neocork   View Specifications
The durability and versatility of cork has made it one of the most popular materials for sealing applications. Being a natural product, it possesses many advantages. It can be compounded with a variety of raw materials to provide a comprehensive range of sealing products.  High tensile strength, resistance to many fluids, ability to withstand extremes of temperature - with the natural properties of cork - high compression, good recovery and low load sealing.
Gasket Sheeting - EPDM   View Specifications
EPDM stands for Ethylene Propylene Diene Monomer. Engineering specifications describe EPDM as "Ideal for outdoor applications because of its excellent resistance to ultra-violet light, ozone, oxidants, and severe weather conditions."
Stays flexible in temperatures from -40 Fahrenheit to 175 Fahrenheit making it easy to install all year round. Unlike other liner materials, it does not contain plasticizers that could make it become brittle with age and cause cracks or splits in the material; threatening aquatic life.
EPDM's flexibility provides more versatility in numerous designs. Unlike preformed liners, it can be easily shaped to fit the unique contours of... more»
Gasket Sheeting - Gum Stock   View Specifications
Water, air and average concentration bases, alcohols and salts. Adhesion to metals is excellent and ketones are abrasion resistant.
Gasket Sheeting - Insertion Rubber   View Specifications
This rubber product is made of natural rubber with a cloth inner liner, giving the product higher tear strength than ordinary rubber sheeting. Insertion Rubber is used for a variety of applications including matting, packing, gaskets dust curtains and mud flaps.
Nitrile Insertion rubber is used for some gasket and diaphragm applications.
Gasket Sheeting - Klinger Non-Asbestos   View Specifications
For Steam, water and non-aggressive solvents and a wide range of chemicals.
Gasket Sheeting - Neoprene   View Specifications
One of the earliest of the synthetic materials to be developed as an oil resistant substitute for Natural Rubber, Neoprene is a homopolymer of chloroprene (chlorobutadiene).
Temperature Range: Standard Compound: 45 F to +250 F. (Dry Heat Only)
Hardness (Shore A): 40 to 90.
Features: Neoprene can be used in innumerable sealing applications, due to its broad base of such desirable working properties as: moderate resistance to petroleum oils; good resistance to ozone, sunlight and oxygen aging; relatively low compression set; good resilience; and reasonable production cost.
Due to its excellent resistance to  Ammonia, Neoprene is also widely accepted as... more»
Gasket Sheeting - Nitrile   View Specifications
Nitrile rubber, or Buna-N,is a synthetic rubber copolymer of acrylonitrile (CAN) and butadiene.  This copolymer of butadiene and acrylonitrile is recommended when excellent resistance to petroleum oils and gasoline is required.  Solvent resistance increases and low temperature flexibility decreases in basic polymers with higher acrylonitrile content. Low temperature resistance is inferior to natural rubber, but NBR can be compounded to give adequate performance in this area.
Gasket Sheeting - Red Neoprene   View Specifications
High-grade polymer for oil / fuel applications. Good weathering.
Gasket Sheeting - Silicone   View Specifications
Dielectric properties are of primary importance; weather, oxidation, certain oils and chemicals; shelf storage life is greater than natural or synthetic rubbers; stays soft and flexible when stressed and exposed to outdoor weathering for long periods of time.
Gasket Sheeting - Sponge-Neo 25
This industrial type neoprene sponge is oil resistant and durable.
Gasket Sheeting - Velemoid/Flexoid   View Specifications
Excellent oil and fuel resistance. 
Available in roll or sheet form over a wide range of thicknesses.
Gland Packing - Food Grade Packing
Food Process Packing is constructed with a specially designed lubricant to provide superior sealing capability, especially in rotating equipment such as pumps, mixers and agitators. Interbraided construction ensures maximum strength as well as minimal wicking of fluid through the packing.
Gland Packing - Graphite Die-formed Rings
Graphite Die-Formed Packing Rings main uses are for dynamic sealing of compressors, pumps and valves.  Packing for the gland boxes of chemical instruments  and for composite sealing to take the place of mechanical sealing.
Gland Packing - Graphite Tape
 
Gland Packing - Manlid Seals
For the safe transport, storage and process of hazardous liquids, food stuffs, gases and powders.
Industrial Coatings - Anti-Corrosion - Primers
Corrosion resistant primer/spot primer.
Industrial Coatings - Anti-Corrosion - Top Coats
Single and two component, UV stable  and non UV stable paint systems.  SABS colour chart colours and clear systems.
Industrial Coatings - Floor Coatings - Acrylic
 
Industrial Coatings - Floor Coatings - Urethane
Brush grade PU systems for abrasion, chemical and corrosion resistance.
Mountings - Anti-vibration
These anti-vibration mountings are simple in structure and can be widely used bringing about excellent effects in prevention of vibration, shock and noise control of machinery and equipment.
Pump Packing - Braided Aramid/Kevlar   View Specifications
Klinger Style 25 Packing is manufactured from the well-known yellow aramid fibre which is renowned for being an exceptionally strong, yet flexible yarn, allowing it to be used in higher pressure applications than normal braided packings. The steel-like strength of the yarn makes it ideally suitable for use as back-up rings with other types of packing to resist extrusion.
Pump Packing - Braided Asb/Flax/PTFE   View Specifications
Klinger Style 1010 Packing is manufactured from pure long-fibre white chrysotile asbestos yarn, which is thoroughly lubricated with a high flash point, semi-colloidal mixture of heavy mineral oil and graphite. 
The yarns are individually lubricated and the Klinger-lock principle is used to manufacture the packing, which allows for maximum lubrication, and enables the packing to stay soft even under the most arduous conditions. Its extremely low friction characteristics reduce shaft wear because it eases fabric to metal contact.
Pump Packing - Braided Graph-3222   View Specifications
Klinger Style 3222 Flexygraf Packing is a unique packing, braided from expanded graphite, giving it capabilities which are without equal when used as a mechanical compression packing. Its effectiveness is a function of its crystalline structure, which gives Klinger Style 3222 Flexygraf Packing the permanent resilience and elasticity so important in ensuring the effectiveness of mechanical packings.
Klinger Style 3222 Flexygraf Packing has permanent resilience, is self-lubricating, chemically inert, relatively soft and compressible, will not wick or leak by capillarity, has an indefinite shelf life and is plaited from pure expanded graphite without resins, fillers or binders. This makes... more»
Pump Packing - Braided Graph-4322   View Specifications
Klinger Style 4322 is a non-asbestos packing, braided using the Klinger-lock method from pure PTFE. A special technique has been used so that copious quantities of free graphite are incorporated giving the packing markedly better heat transfer properties when compared to other graphitized pure PTFE types. The incorporation of graphite greatly reduces frictional heat, and the temperature of the packing on the sliding surface rises very little above ambient.
Klinger Style 4322 is an extremely supple and conformable packing, making it good for use on worn shafts, and the reduced expansion of the packing within the temperature limits... more»
Pump Packing - Braided Graph-4330   View Specifications
Klinger Style 4330 is a new generation inter-braided synthetic packing, offering the utility of asbestos, the toughness of aramid fibre, the low friction of carbon fibre, and the chemical resistance and non-staining characteristics of PTFE, making it the first real multi-purpose packing without environmental concerns or premium costs.
Being a soft, pliable fibre, individually coated with PTFE lubricants and further lubricated with a paraffinic oil, it readily reacts to even the slightest of gland pressures, conforms easily to stuffing box configurations, does not cause excessive shaft wear, resists extrusion, is clean to handle and will not leach... more»
Technical Maintenance Products - Anti-Seize   View Specifications
A blend of ultra fine particles in a modified grease base with special extreme additives and anti-corrosion package.  Ensures a unique anti-seize formulation that will not fail even at high temperature.
Technical Maintenance Products - Belt Grip
Designed to eliminate slippage on any belt drives.  Suitable for pumps, generators, compressors, fans, etc.
Technical Maintenance Products - Chain Lube
Specially formulated to penetrate between the close clearance of chain drive bushing and pins to provide critical lubrication. 
Technical Maintenance Products - Cut-Tec
Lubricant for all types of metal cutting and forming.  Used on gear cutters, broaches, grinders, and automatic screw machines.
Technical Maintenance Products - Electric Motor Cleaner
Removes grease, sludge, dirt from operating (or disassembled) motors and electrical systems.
Technical Maintenance Products - Hand Cleaner - Lanolin
General purpose, medium grit hand cleaner with Lanolin.
Technical Maintenance Products - Hand Cleaner - Standard   View Specifications
This is a solvent base waterless hand cleaner. Contains natural soap and synthetic detergents. Contains no aromatic solvents.
Benefits:   Readily emulsifies grease, dirt and acid.  Mild on skin.  Can wipe clean with cloth or rinse under water.  Antiseptic clean smelling fragrance.
Technical Maintenance Products - Penetrating Lube   View Specifications
PS23 Aerosol Penetrant has excellent releasing and freeing properties and is a very advanced formulation that lubricates as it penetrates fast. It is a product closely related to the PS23 METAL TREATMENT OIL and is packed as an aerosol for spray application on tight bolts, nuts, rusty locks, hinges, tools, chains, bearings, sticky carburetor throttles, clutch and hand brake cables, blinds, curtain rails and on anything that squeaks, slides, rolls or swivels.
Technical Maintenance Products - Rust Protector   View Specifications
PS23 Rust Protector is a unique product that can control corrosion on all metals. It protects hinges, nuts, bolts, sliding mechanisms, door rollers, inner vehicle panels and other assemblies, etc. As it eliminates moisture containing dirt and pollutants it protects the metal for long periods.
Technical Maintenance Products - Rust Transformer
Rust Transformer.  Chemically transforms rust into rust inhibiting protective film.
Technical Maintenance Products - Solvent Cleaner
Safety Solvent Cleaner.  Non-flammable cleaner and degreaser for electrical and mechanical equipment.
Technical Maintenance Products - Thread Seal Paste/Tape
High quality pure PTFE Thread Sealant.
Valve Stem Packing - Braided Asb/Inc   View Specifications
Klinger Style 1028 is the ideal high-temperature, high-pressure valve stem packing.  Constructed in the braid-over-core method, the jacket is manufactured from high-grade long fibre asbestos yarn reinforced with inconel wire, ensuring high tensile strength and corrosion resistance at elevated temperatures and pressures.
Valve Stem Packing - Braided PTFE   View Specifications
Klinger Style 54S is manufactured in Klinger-lock construction from pure PTFE filament yarns which have been surface treated with PTFE dispersion prior to braiding. This, along with modern technology used in the braiding process, results in an almost perfectly square packing ensuring increased sealing contact with reduced gland pressures.
Valve Stem Packing - Valvelon   View Specifications
Valve Seal has a braided jacket of PTFE wrapped around a pliable core of PTFE. It is chemically resistant and easily compresses into uneven flanges to fill voids. Because of its low friction characteristics and because it never hardens, it is most ideal for Valve Gland Packing.
 
Back to the Top
HomeFindLogin