Moulding a Future in Quality

 


 

info@gentechpu.com

ISO 9001:2008

 


 

barry@gentechpu.com

 

 

 

 

 

 

 

 

Company ProfileHomeFindLogin  
 Serving Industries
Belzona Metal Treatment - Ceramic R-Metal   View Specifications
Ceramic R-Metal is a repair system designed for rebuilding metals damaged by erosion-corrosion.
Belzona Metal Treatment - Ceramic S-Metal   View Specifications
Ceramic S-Metal is a repair system designed for surfacing metals attacked by erosion-corrosion.
Belzona Metal Treatment - Degreaser/Cleaner   View Specifications
Solvent for degreasing.
Belzona Metal Treatment - High Temp Coating   View Specifications
Coating system for high temperature equipment handling water and aqueous solutions.
Belzona Metal Treatment - Other
Metal erosion is a continual problem in Industry and often results in costly equipment having to be replaced, such as pumps, valves and pipes.
Belzona Metal Treatment - SR Elastomer   View Specifications
A two-part, rapid curing elastomeric material for repairing and rebuilding rubber components.  Allows repaired component to be put back into service almost immediately.
Bump Stops & Drum Stops - Bumps Stops
These Bump Stops are usually supplied in a rubber material. The rubber often absorbs oil, which results in de-bonding.
Gentech manufactures Bump Stops from a tough elastomer that is oil resistant and durable, ensuring much longer life.
Bushings - Engineering Plastic - Acetal/Delrin   View Specifications
Acetal homopolymers properties include low water absorption and superior creep resistance, tensile strength, and fatigue endurance. It is resistant to hydrocarbons, solvents, and neutral chemicals.
Bushings - Engineering Plastic - Ertalyte   View Specifications
The specific properties of this virgin crystalline PET make it specially suitable for the manufacture of mechanical precision parts which have to sustain high loads and / or are subject to wear.
Bushings - Engineering Plastic - Nylon Natural   View Specifications
Nylon is one of the most versatile and widely used thermoplastic materials. Its physical properties and reasonable price combine to make it a popular choice for numerous applications. It can replace steel, brass, bronze, aluminium, wood, and rubber, while reducing noise, using less lubrication, and increasing gear life.
Bushings - Engineering Plastic - PTFE (Teflon)   View Specifications
Teflon PTFE (polytetrafluoroethylene) is a fluorocarbon. It offers superior heat resistance (up to 500 F/260 C) coupled with excellent chemical resistance and lubricant. Very few materials will stick to it.  It is inert to almost all chemicals, cannot be dissolved, and exhibits no moisture absorption.
Bushings - Engineering Plastic - UHMWPE   View Specifications
Ultra High Molecular Weight Polyethylene (UHMWPE) is 1/8 the weight of mild steel but is high in tensile strength and as simple to machine as wood. Also unlike steel, UHMWPE reduces noise in many applications. It is an inexpensive alternative to metals, ceramics, and wood because it is self-lubricating; long-wearing; and shatter-, abrasion-, and corrosion-resistant. UHMWPE is well suited for applications that demand durability and low friction.
Chain Guides - Injection Moulded - Chain Guides - Injection Moulded
Gentech manufactures a Plastic Chain Guide that simply bolts onto the side of the Link Chains. This provides total protection of the chain and steel guides. Unfortunately the Plastic Guides cannot be used on chains which go through hot ovens.
Conveyor - Wear Strip
Polyethylene wear strips are commonly used in conveyor systems and often have special shapes to clip into channels.
Cut Gaskets - Injection Moulded - Headlight
Headlight Gasket
Cut Gaskets - Insulating - Ring Gasket   View Specifications
Ring Joint Gasket Insulating Set Assembly Insulating oval section ring joint will fit into a standard RTJ Flange ring groove.
Cut Gaskets - Neoprene   View Specifications
One of the earliest of the synthetic materials to be developed as an oil resistant substitute for Natural Rubber, Neoprene is a homopolymer of chloroprene (chlorobutadiene).
Temperature Range: Standard Compound: 45 F to +250 F. (Dry Heat Only)
Hardness (Shore A): 40 to 90.
Features: Neoprene can be used in innumerable sealing applications, due to its broad base of such desirable working properties as: moderate resistance to petroleum oils; good resistance to ozone, sunlight and oxygen aging; relatively low compression set; good resilience; and reasonable production cost.
Due to its excellent resistance to  Ammonia, Neoprene is also widely accepted as... more»
Cut Gaskets - Nitrile   View Specifications
Nitrile rubber, or Buna-N,is a synthetic rubber copolymer of acrylonitrile (CAN) and butadiene.  This copolymer of butadiene and acrylonitrile is recommended when excellent resistance to petroleum oils and gasoline is required.  Solvent resistance increases and low temperature flexibility decreases in basic polymers with higher acrylonitrile content. Low temperature resistance is inferior to natural rubber, but NBR can be compounded to give adequate performance in this area.
Cut Gaskets - Silicone   View Specifications
... more»
Document Holders - Document Holders
Our Document Holders are made from clear impact resistant acrylic and can easily be attached to the side of a machine, or installed at a workstation.

Operators can easily view spec sheets or instructions without handling the documents, thereby preventing the paperwork from being soiled.
Horizontal and Vertical Holders are available.
Gasket Cutter - Gasket Cutter
Designed to cut gaskets.
Gasket Sheeting -
 
 
Leak Test Masks - Leak Test Masks
Gentech manufactures various Leak Test Seals for Cylinder Heads, Sub-Assemblies and Oil Sumps by grouping together entire areas that need to be sealed simultaneously prior to pressure testing.
Masks/Grommets - Injection Moulded
 
Masks/Grommets - PU
Previously, areas of the vehicle body which required protection from paint and underbody sealer were protected by masking tape and brown paper.  This proved to be very laborious and expensive and the blanked off areas were never consistent.
We have developed special Blank-Off Masks for most underbody areas which fit precisely into recesses and once the underbody sealer is applied, the masks are easily removed leaving a clean surface.
Mechanical Seals - AES Seals
AESSEAL design and manufacture a wide range of special seals and are experts in sealing in many different industries.
Nozzles - PU Coated - Nozzles - PU Coated
 
Pipefix - Pipe Fix Packs   View Specifications
Pipefix is a revolutionary new emergency repair kit made from a resin impregnated fibreglass tape, which is suitable for use in automotive, tyres and textile industries as well as mining, marine and domestic.
The one step application method ensures rapid and secure repairs to leaking pipes without the usual added fuss of measuring, messing, cleaning-up and waiting. It is chemically resistant to most acids and chemicals; however, it is not suitable for Acetic and Formic Acid, Ammonia, Cresol, Methylene Chloride or Acetone.
Pipefix - Pipe Fix Rolls   View Specifications
Pipefix is a revolutionary new emergency repair kit made from a resin impregnated fibreglass tape, which is suitable for use in automotive, tyres and textile industries as well as mining, marine and domestic.
The one step application method ensures rapid and secure repairs to leaking pipes without the usual added fuss of measuring, messing, cleaning-up and waiting. It is chemically resistant to most acids and chemicals; however, it is not suitable for Acetic and Formic Acid, Ammonia, Cresol, Methylene Chloride or Acetone.
Rollers - Plastic
 
Rollers - PU
Resistant to high pressure wear cutting and resilience is good. Application of the rollers are, conveyor rollers, mechanical drive rollers and high pressure rollers.
Seal-lon PTFE Gasketing - Cord/Valvelon   View Specifications
Valve Seal has a braided jacket of PTFE wrapped around a pliable core of PTFE. It is chemically resistant and easily compresses into uneven flanges to fill voids. Because of its low friction characteristics and because it never hardens, it is most ideal for Valve Gland Packing.
Seal-lon PTFE Gasketing - Flat Adhesive
Seal-lon is a pliable PTFE flat cord with or without adhesive backing and is used for making quick and easy gaskets and seals for flanges and covers.
Seal-lon fills voids and is effective on irregular surfaces.
Technical Maintenance Products - Anti-Seize   View Specifications
A blend of ultra fine particles in a modified grease base with special extreme additives and anti-corrosion package.  Ensures a unique anti-seize formulation that will not fail even at high temperature.
Technical Maintenance Products - Chain Lube
Specially formulated to penetrate between the close clearance of chain drive bushing and pins to provide critical lubrication. 
Technical Maintenance Products - Electric Motor Cleaner
Removes grease, sludge, dirt from operating (or disassembled) motors and electrical systems.
Technical Maintenance Products - Gear-Tec
Wire Rope & Open gear Lubricant.
Technical Maintenance Products - Penetrating Lube   View Specifications
PS23 Aerosol Penetrant has excellent releasing and freeing properties and is a very advanced formulation that lubricates as it penetrates fast. It is a product closely related to the PS23 METAL TREATMENT OIL and is packed as an aerosol for spray application on tight bolts, nuts, rusty locks, hinges, tools, chains, bearings, sticky carburetor throttles, clutch and hand brake cables, blinds, curtain rails and on anything that squeaks, slides, rolls or swivels.
Technical Maintenance Products - Rust Protector   View Specifications
PS23 Rust Protector is a unique product that can control corrosion on all metals. It protects hinges, nuts, bolts, sliding mechanisms, door rollers, inner vehicle panels and other assemblies, etc. As it eliminates moisture containing dirt and pollutants it protects the metal for long periods.
 
Back to the Top
HomeFindLogin